Your browser doesn't support javascript.
Show: 20 | 50 | 100
Results 1 - 20 de 112
Filter
1.
Int J Mol Sci ; 24(10)2023 May 15.
Article in English | MEDLINE | ID: covidwho-20242074

ABSTRACT

Previously, functional coatings on 3D-printed titanium implants were developed to improve their biointegration by separately incorporating Ga and Ag on the biomaterial surface. Now, a thermochemical treatment modification is proposed to study the effect of their simultaneous incorporation. Different concentrations of AgNO3 and Ga(NO3)3 are evaluated, and the obtained surfaces are completely characterized. Ion release, cytotoxicity, and bioactivity studies complement the characterization. The provided antibacterial effect of the surfaces is analyzed, and cell response is assessed by the study of SaOS-2 cell adhesion, proliferation, and differentiation. The Ti surface doping is confirmed by the formation of Ga-containing Ca titanates and nanoparticles of metallic Ag within the titanate coating. The surfaces generated with all combinations of AgNO3 and Ga(NO3)3 concentrations show bioactivity. The bacterial assay confirms a strong bactericidal impact achieved by the effect of both Ga and Ag present on the surface, especially for Pseudomonas aeruginosa, one of the main pathogens involved in orthopedic implant failures. SaOS-2 cells adhere and proliferate on the Ga/Ag-doped Ti surfaces, and the presence of gallium favors cell differentiation. The dual effect of both metallic agents doping the titanium surface provides bioactivity while protecting the biomaterial from the most frequent pathogens in implantology.


Subject(s)
Gallium , Titanium , Titanium/pharmacology , Titanium/chemistry , Silver/pharmacology , Silver/chemistry , Osseointegration , Porosity , Gallium/pharmacology , Coated Materials, Biocompatible/pharmacology , Coated Materials, Biocompatible/chemistry , Anti-Bacterial Agents/pharmacology , Anti-Bacterial Agents/chemistry , Surface Properties
2.
J Hazard Mater ; 456: 131654, 2023 08 15.
Article in English | MEDLINE | ID: covidwho-2320886

ABSTRACT

Functional face masks that can effectively remove particulate matter and pathogens are critical to addressing the urgent health needs arising from industrial air pollution and the COVID-19 pandemic. However, most commercial masks are manufactured by tedious and complicated network-forming procedures (e.g., meltblowing and electrospinning). In addition, the materials used (e.g., polypropylene) have significant limitations such as a lack of pathogen inactivation and degradability, which can cause secondary infection and serious environmental concerns if discarded. Here, we present a facile and straightforward method for creating biodegradable and self-disinfecting masks based on collagen fiber networks. These masks not only provide superior protection against a wide range of hazardous substances in polluted air, but also address environmental concerns associated with waste disposal. Importantly, collagen fiber networks with naturally existing hierarchical microporous structures can be easily modified by tannic acid to improve its mechanical characteristics and enable the in situ production of silver nanoparticles. The resulting masks exhibit excellent antibacterial (>99.99%, 15 min) and antiviral (>99.999%, 15 min) capabilities, as well as high PM2.5 removal efficiency (>99.9%, 30 s). We further demonstrate the integration of the mask into a wireless platform for respiratory monitoring. Therefore, the smart mask has enormous promise for combating air pollution and contagious viruses, managing personal health, and alleviating waste issues caused by commercial masks.


Subject(s)
COVID-19 , Metal Nanoparticles , Humans , Antiviral Agents , Pandemics/prevention & control , COVID-19/prevention & control , Silver , Dust , Anti-Bacterial Agents/pharmacology , Collagen
3.
Int J Nanomedicine ; 18: 2307-2324, 2023.
Article in English | MEDLINE | ID: covidwho-2315052

ABSTRACT

Introduction: The coronavirus disease 2019 (COVID-19) pandemic has demonstrated the need for novel, affordable, and efficient reagents to help reduce viral transmission, especially in high-risk environments including medical treatment facilities, close quarters, and austere settings. We examined transition-metal nanozeolite suspensions and quaternary ammonium compounds as an antiviral surface coating for various textile materials. Methods: Zeolites are crystalline porous aluminosilicate materials, with the ability of ion-exchanging different cations. Nanozeolites (30 nm) were synthesized and then ion-exchanged with silver, zinc and copper ions. Benzalkonium nitrate (BZN) was examined as the quaternary ammonium ion (quat). Suspensions of these materials were tested for antiviral activity towards SARS-CoV-2 using plaque assay and immunostaining. Suspensions of the nanozeolite and quat were deposited on polyester and cotton fabrics and the ability of these textiles towards neutralizing SARS-CoV-2 was examined. Results: We hypothesized that transition metal ion containing zeolites, particularly silver and zinc (AM30) and silver and copper (AV30), would be effective in reducing the infectivity of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Additionally, AM30 and AV30 antiviral potency was tested when combined with a quaternary ammonium carrier, BZN. Our results indicate that exposure of SARS-CoV-2 to AM30 and/or AV30 suspensions reduced viral loads with time and exhibited dose-dependence. Antiviral activities of the combination of zeolite and BZN compositions were significantly enhanced. When used in textiles, AM30 and AV30-coated cotton and polyester fabrics alone or in combination with BZN exhibited significant antiviral properties, which were maintained even after various stress tests, including washes, SARS-CoV-2-repeated exposures, or treatments with soil-like materials. Conclusion: This study shows the efficacy of transition metal nanozeolite formulations as novel antiviral agents and establishes that nanozeolite with silver and zinc ions (AM30) and nanozeolite with silver and copper ions (AV30) when combined with benzalkonium nitrate (BZN) quickly and continuously inactivate SARS-CoV-2 in suspension and on fabric materials.


Subject(s)
COVID-19 , Zeolites , Humans , SARS-CoV-2 , COVID-19/prevention & control , Antiviral Agents/pharmacology , Antiviral Agents/therapeutic use , Silver/chemistry , Copper , Quaternary Ammonium Compounds , Benzalkonium Compounds , Suspensions , Nitrates , Textiles , Zinc , Polyesters
4.
ACS Sens ; 8(5): 2011-2020, 2023 05 26.
Article in English | MEDLINE | ID: covidwho-2298962

ABSTRACT

Single-particle collision electrochemistry (SPCE) has shown great promise in biosensing applications due to its high sensitivity, high flux, and fast response. However, a low effective collision frequency and a large number of interfering substances in complex matrices limit its broad application in clinical samples. Herein, a novel and universal SPCE biosensor was proposed to realize sensitive detection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) based on the collision and oxidation of single silver nanoparticles (Ag NPs) on polysulfide-functionalized gold ultramicroelectrodes (Ps-Au UMEs). Taking advantage of the strong interaction of the Ag-S bond, collision and oxidation of Ag NPs on the Ps-Au UME surface could be greatly promoted to generate enhanced Faraday currents. Compared with bare Au UMEs, the collision frequency of Ps-Au UMEs was increased by 15-fold, which vastly improved the detection sensitivity and practicability of SPCE in biosensing. By combining magnetic separation, liposome encapsulation release, and DNAzyme-assisted signal amplification, the SPCE biosensor provided a dynamic range of 5 orders of magnitude for spike proteins with a detection limit of 6.78 fg/mL and a detection limit of 21 TCID50/mL for SARS-CoV-2. Furthermore, SARS-CoV-2 detection in nasopharyngeal swab samples of infected patients was successfully conducted, indicating the potential of the SPCE biosensor for use in clinically relevant diagnosis.


Subject(s)
COVID-19 , Metal Nanoparticles , Humans , SARS-CoV-2 , Microelectrodes , Metal Nanoparticles/chemistry , COVID-19/diagnosis , Electrochemistry , Silver
5.
ACS Sens ; 8(4): 1422-1430, 2023 04 28.
Article in English | MEDLINE | ID: covidwho-2303906

ABSTRACT

Here, quercetin-mediated silver nanoparticle (AgNP) formation combined with loop-mediated isothermal amplification (LAMP) was introduced to colorimetrically detect two major infectious pathogens, SARS-CoV-2 and Enterococcus faecium, using a foldable PMMA microdevice. The nitrogenous bases of LAMP amplicons can readily form a complex with Ag+ ions, and the catechol moiety in quercetin, which acted as a reducing agent, could be chelated with Ag+ ions, resulting in the easy electron transfer from the oxidant to the reductant and producing brown-colored AgNPs within 5 min. The introduced method exhibited higher sensitivity than agarose gel electrophoresis due to more active redox centers in quercetin. The detection limit was attained at 101 copies µL-1 and 101 CFU mL-1 for SARS-CoV-2 RNA and E. faecium, respectively. A foldable microdevice made of two pieces of PMMA that fully integrates DNA extraction, amplification, and detection processes was fabricated to establish practical applicability. On one PMMA, DNA extraction was performed in a reaction chamber inserted with an FTA card, and then LAMP reagents were added for amplification. Silver nitrate was added to the reaction chamber after LAMP. On the other PMMA, quercetin-soaked paper discs loaded in the detection chamber were folded toward the reaction chamber for colorimetric detection. An intense brown color was produced within 5 min when heated at 65 °C. The introduced colorimetric assay, which is highly favorable for laboratory and on-site applications, could be a valuable alternative to conventional methods for detecting infectious diseases, given its unique principle, simplicity, and naked-eye detection.


Subject(s)
COVID-19 , Communicable Diseases , Metal Nanoparticles , Humans , Colorimetry/methods , Quercetin , Polymethyl Methacrylate , RNA, Viral , SARS-CoV-2 , Silver , DNA
6.
Anal Chim Acta ; 1255: 341102, 2023 May 15.
Article in English | MEDLINE | ID: covidwho-2288795

ABSTRACT

Although many approaches have been developed for the quick assessment of SARS-CoV-2 infection, few of them are devoted to the detection of the neutralizing antibody, which is essential for assessing the effectiveness of vaccines. Herein, we developed a tri-mode lateral flow immunoassay (LFIA) platform based on gold-silver alloy hollow nanoshells (Au-Ag HNSs) for the sensitive and accurate quantification of neutralizing antibodies. By tuning the shell-to-core ratio, the surface plasmon resonance (SPR) absorption band of the Au-Ag HNSs is located within the near infrared (NIR) region, endowing them with an excellent photothermal effect under the irradiation of optical maser at 808 nm. Further, the Raman reporter molecule 4-mercaptobenzoic acid (MBA) was immobilized on the gold-silver alloy nanoshell to obtain an enhanced SERS signal. Thus, these Au-Ag HNSs could provide colorimetric, photothermal and SERS signals, with which, tri-mode strips for SARS-CoV-2 neutralizing antibody detection were constructed by competitive immunoassay. Since these three kinds of signals could complement one another, a more accurate detection was achieved. The tri-mode LFIA achieved a quantitative detection with detection limit of 20 ng/mL. Moreover, it also successfully detected the serum samples from 98 vaccinated volunteers with 79 positive results, exhibiting great application value in neutralizing antibody detection.


Subject(s)
Antibodies, Neutralizing , COVID-19 , Immunoassay , Nanoshells , SARS-CoV-2 , Spectrum Analysis, Raman , Humans , Alloys , Antibodies, Neutralizing/immunology , Antibodies, Neutralizing/isolation & purification , Antibodies, Viral/immunology , Colorimetry/methods , COVID-19/diagnosis , COVID-19/immunology , Gold , Immunoassay/instrumentation , Immunoassay/methods , Metal Nanoparticles , SARS-CoV-2/immunology , Silver , Spectrum Analysis, Raman/methods
7.
New Microbiol ; 46(1): 60-64, 2023 Feb.
Article in English | MEDLINE | ID: covidwho-2288297

ABSTRACT

In this study we evaluated the antiviral activity of the Silver Barrier® disinfectant against SARSCoV-2. Silver Barrier® showed time- and concentration-dependent antiviral activity against SARSCoV-2. After 5 min contact time, Silver Barrier® at 0.002% showed a strong inhibitory effect (p<0.001), with a 2-fold reduction of viral genome copy numbers, and a robust suppression (94%) of SARS-CoV-2 infectivity. Considering the effects obtained in solution and within a very short time, Silver Barrier® stands as an excellent new candidate for the disinfection of work environments, especially at the healthcare level, where there are people at high risk of serious illnesses.


Subject(s)
COVID-19 , Disinfectants , Humans , SARS-CoV-2 , Disinfectants/pharmacology , COVID-19/prevention & control , Silver/pharmacology , Antiviral Agents/pharmacology
8.
Eur Rev Med Pharmacol Sci ; 27(3): 1203-1206, 2023 02.
Article in English | MEDLINE | ID: covidwho-2263973

ABSTRACT

OBJECTIVE: Enzyme-linked immunosorbent assay (ELISA) is a widely used biochemical analytical method for the detection of a biomarker, through a specific antigen-antibody reaction. A common with ELISA is the amount of concrete biomarkers falling below the detection limit. Thus, the approach that will contribute to enhanced sensitivity of enzyme-linked immunosorbent assay is of great importance for medical practice. To address this issue, we used nanoparticles to improve the detection limit of traditional ELISA. MATERIALS AND METHODS: 80 samples were used, for which the presence of IgG antibodies against SARS-CoV-2 nucleocapsid protein were already determined qualitatively.  We tested the samples using an in vitro ELISA kit [SARS-CoV-2 IgG ELISA, COVG0949 (NovaTec, Leinfelden-Echterdingen, Germany)]. Additionally, we tested the same sample with the same ELISA kit but with the addition of 50 nm diameter citrate-capped silver nanoparticles. The reaction was performed, and data were calculated according to manufacturer guidelines. To measure ELISA results absorbance (optical density - OD) at 450 nm was read. RESULTS: Greater absorbance values have been revealed in case of silver nanoparticles application (66 cases, 82.5%, p<0.05). ELISA with application of nanoparticles classified 19 equivocal cases as positive and 3 equivocal ones as negative, 1 negative case as equivocal. CONCLUSIONS: Our findings suggest that nanoparticles can be used to improve the sensitivity of ELISA method and increase the detection limit. Thus, it is logical and desirable to enhance the sensitivity of ELISA method by application of nanoparticles; the approach is low cost and with a positive impact on accuracy.


Subject(s)
COVID-19 , Metal Nanoparticles , Humans , SARS-CoV-2 , Immunoglobulin G , Silver , Enzyme-Linked Immunosorbent Assay/methods , Sensitivity and Specificity
9.
Int J Mol Sci ; 24(3)2023 Jan 25.
Article in English | MEDLINE | ID: covidwho-2262037

ABSTRACT

Frequently touched surfaces (FTS) that are contaminated with pathogens are one of the main sources of nosocomial infections, which commonly include hospital-acquired and healthcare-associated infections (HAIs). HAIs are considered the most common adverse event that has a significant burden on the public's health worldwide currently. The persistence of pathogens on contaminated surfaces and the transmission of multi-drug resistant (MDR) pathogens by way of healthcare surfaces, which are frequently touched by healthcare workers, visitors, and patients increase the risk of acquiring infectious agents in hospital environments. Moreover, not only in hospitals but also in high-traffic public places, FTS play a major role in the spreading of pathogens. Consequently, attention has been devoted to developing novel and alternative methods to tackle this problem. This study planned to produce and characterize innovative functionalized enameled coated surfaces supplemented with 1% AgNO3 and 2% AgNO3. Thus, the antimicrobial properties of the enamels against relevant nosocomial pathogens including the Gram-positive Staphylococcus aureus and the Gram-negative Escherichia coli and the yeast Candida albicans were assessed using the ISO:22196:2011 norm.


Subject(s)
Anti-Infective Agents , Cross Infection , Humans , Antifungal Agents/pharmacology , Silver/pharmacology , Anti-Infective Agents/pharmacology , Anti-Bacterial Agents/pharmacology , Cross Infection/prevention & control , Cross Infection/microbiology , Microbial Sensitivity Tests
10.
Appl Microbiol Biotechnol ; 107(2-3): 623-638, 2023 Feb.
Article in English | MEDLINE | ID: covidwho-2268536

ABSTRACT

COVID-19 patients have often required prolonged endotracheal intubation, increasing the risk of developing ventilator-associated pneumonia (VAP). A preventive strategy is proposed based on an endotracheal tube (ETT) modified by the in situ deposition of eucalyptus-mediated synthesized silver nanoparticles (AgNPs). The surfaces of the modified ETT were embedded with AgNPs of approximately 28 nm and presented a nanoscale roughness. Energy dispersive X-ray spectroscopy confirmed the presence of silver on and inside the coated ETT, which exhibited excellent antimicrobial activity against Gram-positive and Gram-negative bacteria, and fungi, including multidrug-resistant clinical isolates. Inhibition of planktonic growth and microbial adhesion ranged from 99 to 99.999% without cytotoxic effects on mammalian cells. Kinetic studies showed that microbial adhesion to the coated surface was inhibited within 2 h. Cell viability in biofilms supplemented with human tracheal mucus was reduced by up to 95%. In a porcine VAP model, the AgNPs-coated ETT prevented adhesion of Pseudomonas aeruginosa and completely inhibited bacterial invasion of lung tissue. The potential antimicrobial efficacy and safety of the coated ETT were established in a randomized control trial involving 47 veterinary patients. The microbial burden was significantly lower on the surface of the AgNPs-coated ETT than on the uncoated ETT (p < 0.05). KEY POINTS: • Endotracheal tube surfaces were modified by coating with green-synthesized AgNPs • P. aeruginosa burden of endotracheal tube and lung was reduced in a porcine model • Effective antimicrobial activity and safety was demonstrated in a clinical trial.


Subject(s)
Anti-Infective Agents , COVID-19 , Communicable Diseases , Metal Nanoparticles , Pneumonia, Ventilator-Associated , Humans , Animals , Swine , Anti-Bacterial Agents/pharmacology , Silver/pharmacology , Hospitals, Animal , Metal Nanoparticles/chemistry , Kinetics , Gram-Negative Bacteria , Gram-Positive Bacteria , Anti-Infective Agents/pharmacology , Pneumonia, Ventilator-Associated/prevention & control , Pneumonia, Ventilator-Associated/microbiology , Biofilms , Intubation, Intratracheal/methods , Mammals
11.
Biotechnol Lett ; 45(4): 551-561, 2023 Apr.
Article in English | MEDLINE | ID: covidwho-2271310

ABSTRACT

PURPOSE: We examined the inactivation of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) by a nitrogen-doped titanium dioxide (N-TiO2) visible-light photocatalyst that was activated via light irradiation in the natural environment and was safe for human use as a coating material. METHODS: The photocatalytic activity of glass slides coated with three types of N-TiO2 without metal or loaded with copper or silver and copper was investigated by measuring acetaldehyde degradation. The titer levels of infectious SARS-CoV-2 were measured using cell culture after exposing photocatalytically active coated glass slides to visible light for up to 60 min. RESULTS: N-TiO2 photoirradiation inactivated the SARS-CoV-2 Wuhan strain and this effect was enhanced by copper loading and further by the addition of silver. Hence, visible-light irradiation using silver and copper-loaded N-TiO2 inactivated the Delta, Omicron, and Wuhan strains. CONCLUSION: N-TiO2 could be used to inactivate SARS-CoV-2 variants, including emerging variants, in the environment.


Subject(s)
COVID-19 , SARS-CoV-2 , Humans , SARS-CoV-2/genetics , Nitrogen Dioxide , Silver , Copper , Light , Titanium/radiation effects , Nitrogen , Catalysis
12.
Biosensors (Basel) ; 12(11)2022 Nov 03.
Article in English | MEDLINE | ID: covidwho-2282917

ABSTRACT

This article compares the applications of traditional gold and silver-based SERS substrates and less conventional (Pd/Pt, Cu, Al, Si-based) SERS substrates, focusing on sensing, biosensing, and clinical analysis. In recent decades plethora of new biosensing and clinical SERS applications have fueled the search for more cost-effective, scalable, and stable substrates since traditional gold and silver-based substrates are quite expensive, prone to corrosion, contamination and non-specific binding, particularly by S-containing compounds. Following that, we briefly described our experimental experience with Si and Al-based SERS substrates and systematically analyzed the literature on SERS on substrate materials such as Pd/Pt, Cu, Al, and Si. We tabulated and discussed figures of merit such as enhancement factor (EF) and limit of detection (LOD) from analytical applications of these substrates. The results of the comparison showed that Pd/Pt substrates are not practical due to their high cost; Cu-based substrates are less stable and produce lower signal enhancement. Si and Al-based substrates showed promising results, particularly in combination with gold and silver nanostructures since they could produce comparable EFs and LODs as conventional substrates. In addition, their stability and relatively low cost make them viable alternatives for gold and silver-based substrates. Finally, this review highlighted and compared the clinical performance of non-traditional SERS substrates and traditional gold and silver SERS substrates. We discovered that if we take the average sensitivity, specificity, and accuracy of clinical SERS assays reported in the literature, those parameters, particularly accuracy (93-94%), are similar for SERS bioassays on AgNP@Al, Si-based, Au-based, and Ag-based substrates. We hope that this review will encourage research into SERS biosensing on aluminum, silicon, and some other substrates. These Al and Si based substrates may respond efficiently to the major challenges to the SERS practical application. For instance, they may be not only less expensive, e.g., Al foil, but also in some cases more selective and sometimes more reproducible, when compared to gold-only or silver-only based SERS substrates. Overall, it may result in a greater diversity of applicable SERS substrates, allowing for better optimization and selection of the SERS substrate for a specific sensing/biosensing or clinical application.


Subject(s)
Metal Nanoparticles , Silver , Silver/chemistry , Spectrum Analysis, Raman/methods , Gold/chemistry , Limit of Detection , Silicon/chemistry , Metal Nanoparticles/chemistry
13.
Appl Biochem Biotechnol ; 194(9): 4187-4219, 2022 Sep.
Article in English | MEDLINE | ID: covidwho-2279390

ABSTRACT

Nanotechnology sculptures the current scenario of science and technology. The word nano refers 'small' which ranges from 10 to 100 nm in size. Silver and gold nanoparticles can be synthesized at nanoscale and have unique biological properties like antibacterial, antifungal, antiviral, antiparasitic, antiplatelet, anti-inflammatory, and anti-tumor activity. In this mini review, we shall discuss the various applications of silver and gold nanoparticles (AuNPs) in the field of therapy, imaging, biomedical devices and in cancer diagnosis. The usage of silver nanoparticles(AgNPs) in dentistry and dental implants, therapeutic abilities like wound dressings, silver impregnated catheters, ventricular drainage catheters, combating orthopedic infections, and osteointegration will be elaborated. Gold nanoparticles in recent years have garnered large importance in bio medical applications. They are being used in diagnosis and have recently seen a surge in therapeutics. In this mini review, we shall see about the various applications of AuNP and AgNP, and highlight their evolution in theranostics.


Subject(s)
Gold , Metal Nanoparticles , Anti-Bacterial Agents/therapeutic use , Gold/therapeutic use , Metal Nanoparticles/therapeutic use , Precision Medicine , Silver
14.
PLoS One ; 18(3): e0282631, 2023.
Article in English | MEDLINE | ID: covidwho-2253733

ABSTRACT

This paper investigates whether gold and silver can be considered safe havens by examining their long-run linkages with 13 stock price indices. More specifically, the stochastic properties of the differential between gold/silver prices and 13 stock indices are analysed applying fractional integration/cointegration methods to daily data, first for a sample from January 2010 until December 2019, then for one from January 2020 until June 2022 which includes the Covid-19 pandemic. The results can be summarised as follows. In the case of the pre-Covid-19 sample ending in December 2019, mean reversion is found for the gold price differential only vis-à-vis a single stock index (SP500). whilst in seven other cases, although the estimated value of d is below 1, the value 1 is inside the confidence interval and thus the unit root null hypothesis cannot be rejected. In the remaining cases the estimated values of d are significantly higher than 1. As for the silver differential, the upper bound is 1 only in two cases, whilst in the others mean reversion does not occur. Thus, the evidence is mixed on whether these precious metals can be seen as safe havens, though it appears that this property characterises gold in a slightly higher number of cases. By contrast, when using the sample starting in January 2020, the evidence in favour of gold and silver as possible safe havens is pretty conclusive since mean reversion is only found in a single case, namely that of the gold differential vis-à-vis the New Zealand stock index.


Subject(s)
Brachytherapy , COVID-19 , Humans , Silver , Gold , Pandemics
15.
J Chem Inf Model ; 63(4): 1276-1292, 2023 Feb 27.
Article in English | MEDLINE | ID: covidwho-2231853

ABSTRACT

The novel coronavirus disease and its complications have motivated the design of new sensors with the highest sensitivity, and affinity for the detection of the SARS-CoV-2 virus is considered in many research studies. In this research article, we employ full atomistic molecular dynamics (MD) models to study the interactions between the receptor binding domain (RBD) and spike protein of the coronavirus and different metals such as gold (Au), platinum (Pt), and silver (Ag) to analyze their sensitivity against this virus. The comparison between the RBD interactions with ACE2 (angiotensin-converting enzyme 2) and different metals indicates that metals have remarkable effects on the structural features and dynamical properties of the RBD. The binding site of the RBD has more affinity to the surfaces of gold, platinum, and silver than to the other parts of the protein. Moreover, the initial configuration of the RBD relative to the metal surface plays an important role in the stability of metal complexes with the RBD. The binding face of the protein to the metal surface has been changed in the presence of different metals. In other words, the residues of the RBD that participate in RBD interactions with the metals are different irrespective of the initial configurations in which the [Asn, Thr, Tyr], [Ser, Thr, Tyr], and [Asn, Asp, Tyr] residues of the protein have a greater affinity to Ag, Au, and Pt, respectively. The corresponding metals have a considerable affinity to the RBD, which due to strong interactions with the protein can change the secondary structure and structural features. Based on the obtained results during the complexation process between the protein and metals, the helical structure of the protein changes to the bend and antiparallel ß-sheets. The calculated binding energies for the RBD complexes with silver, gold, and platinum are -95.03, -138.03, and -133.96 kcal·mol-1, respectively. The adsorption process of the spike protein on the surfaces of different metals represents similar results and indicates that the entire spike protein of the coronavirus forms a more stable complex with the gold surface compared with other metals. Moreover, the RBD of the spike protein has more interactions with the surfaces than with the other parts of the protein. Therefore, it is possible to predict the properties of the coronavirus on the metal surface based on the dynamical behavior of the RBD. Overall, our computational results confirm that the gold surface can be considered as an outstanding substrate for developing new sensors with the highest sensitivity against SARS-CoV-2.


Subject(s)
COVID-19 , SARS-CoV-2 , Humans , SARS-CoV-2/metabolism , Silver , Platinum , Gold , Spike Glycoprotein, Coronavirus/metabolism , Protein Binding , Molecular Dynamics Simulation
16.
J Control Release ; 355: 292-311, 2023 03.
Article in English | MEDLINE | ID: covidwho-2230160

ABSTRACT

A Dry Powder Inhaler (DPI) is a technique as well as a device used to inhale formulation which is in the form of dry powder, and is inhaled through the nose or mouth. It was developed for the purpose of treating conditions like chronic obstructive pulmonary disease (COPD), Asthma, and even cystic fibrosis etc. The aim of the review is to discuss the different methods of preparation of dry powders along with the characterization of DPI. Here we present the outline of different methods like supercritical fluid extraction (SCF), spray drying, and milling. The review focussed on various devices including single and multi-dose devices used in the DPI. It also highlights on recent advances in the DPI including nano particulate system, siRNA-based medication, liposomes, and pro-liposomes based delivery. In COVID-19 silver nanoparticles-based DPIs provide very prominent results in the infected lungs. Moreover, this review states that the AI-based DPI development provides and improvement in the bioavailability and effectiveness of the drug along with the role of artificial neural networks (ANN). The study also showed that nasally administered drugs (nose to brain) can easily cross the blood-brain barrier (BBB) and enter the central nervous system (CNS) through the olfactory and trigeminal pathway which provides effective CNS concentrations at lower dosage. It is suggested that DPIs not only target respiratory complications but also treat CNS complications too. This review provides support and guides the researcher in the recent development and evaluation of DPI.


Subject(s)
COVID-19 , Metal Nanoparticles , Humans , Dry Powder Inhalers , Liposomes , Silver , Administration, Inhalation , Powders
17.
Sci Total Environ ; 870: 161889, 2023 Apr 20.
Article in English | MEDLINE | ID: covidwho-2221340

ABSTRACT

Silver-based biocides are applied in face masks because of their antimicrobial properties. The added value of biocidal silver treatment of face masks to control SARS-CoV-2 infection needs to be balanced against possible toxicity due to inhalation exposure. Direct measurement of silver (particle) release to estimate exposure is problematic. Therefore, this study optimized methodologies to characterize silver-based biocides directly in the face masks, by measuring their total silver content using ICP-MS and ICP-OES based methods, and by visualizing the type(s) and localization of silver-based biocides using electron microscopy based methods. Thirteen of 20 selected masks intended for general use contained detectable amounts of silver ranging from 3 µg to 235 mg. Four of these masks contained silver nanoparticles, of which one mask was silver coated. Comparison of the silver content with limit values derived from existing inhalation exposure limits for both silver ions and silver nanoparticles allowed to differentiate safe face masks from face masks that require a more extensive safety assessment. These findings urge for in depth characterization of the applications of silver-based biocides and for the implementation of regulatory standards, quality control and product development based on the safe-by-design principle for nanotechnology applications in face masks in general.


Subject(s)
COVID-19 , Disinfectants , Metal Nanoparticles , Humans , Silver , COVID-19/prevention & control , Masks , SARS-CoV-2
18.
Molecules ; 28(3)2023 Feb 01.
Article in English | MEDLINE | ID: covidwho-2225466

ABSTRACT

The present study aimed to estimate the antiviral activities of Ginkgo biloba (GB) leaves extract and eco-friendly free silver nanoparticles (Ag NPs) against the MERS-CoV (Middle East respiratory syndrome-coronavirus) and HCoV-229E (human coronavirus 229E), as well as isolation and identification of phytochemicals from GB. Different solvents and high-performance liquid chromatography (HPLC) were used to extract and identify flavonoids and phenolic compounds from GB leaves. The green, silver nanoparticle synthesis was synthesized from GB leaves aqueous extract and investigated for their possible effects as anti-coronaviruses MERS-CoV and HCoV-229E using MTT assay protocol. To verify the synthesis of Ag NPs, several techniques were employed, including X-ray diffraction (XRD), scan, transmission electron microscopy, FT-IR, and UV-visible spectroscopy. The highest contents of flavonoids and phenolic compounds were recorded for acetone, methanol, and ethanol as mixtures with water, in addition to pure water. HPLC flavonoids were detected as apegenin, luteolin, myricetin, and catechin, while HPLC phenolic compounds were pyrogallol, caffeic acid, gallic acid, and ellagic acid. In addition, our results revealed that Ag NPs were produced through the shift from yellow to dark brown. TEM examination of Ag NPs revealed spherical nanoparticles with mean sizes ranging from 5.46 to 19.40 nm and an average particle diameter of 11.81 nm. A UV-visible spectrophotometric investigation revealed an absorption peak at λ max of 441.56 nm. MTT protocol signified the use of GB leaves extract as an anti-coronavirus to be best from Ag NPs because GB extract had moderate anti-MERS-CoV with SI = 8.94, while had promising anti-HCov-229E, with an SI of 21.71. On the other hand, Ag NPs had a mild anti-MERS-CoV with SI = 4.23, and a moderate anti-HCoV-229E, with an SI of 7.51.


Subject(s)
Coronavirus 229E, Human , Coronavirus Infections , Metal Nanoparticles , Middle East Respiratory Syndrome Coronavirus , Humans , Ginkgo biloba , Metal Nanoparticles/chemistry , Silver/chemistry , Spectroscopy, Fourier Transform Infrared , Plant Extracts/pharmacology , Plant Extracts/chemistry , Coronavirus Infections/drug therapy , X-Ray Diffraction , Anti-Bacterial Agents/chemistry
19.
Sci Rep ; 13(1): 1593, 2023 01 28.
Article in English | MEDLINE | ID: covidwho-2221870

ABSTRACT

Recently, wearing facemasks in public has been raised due to the coronavirus disease 2019 epidemic worldwide. However, the performance and effectiveness of many existing products have raised significant concerns among people and professionals. Therefore, greater attempts have been focused recently to increase the efficacy of these products scientifically and industrially. In this respect, doping or impregnating facemask fabrics with metallic substances or nanoparticles like silver nanoparticles has been proposed. So, in the present study, we aimed to sonochemically coat silver nanoparticles on the non-woven Spunbond substrates at different sonication times and concentrations to develop antibacterial and antiviral facemask. The coated substrates were characterized using Field Emission Scanning Electron Microscope, Energy Dispersive X-Ray, X-ray diffraction, and Thermogravimetry analysis. The amount of silver released from the coated substrates was measured by atomic absorption spectroscopy. The filtration efficiency, pressure drop, and electrical conductivity of the coated samples were also investigated. The antibacterial activity of fabrics was evaluated against Escherichia coli and Staphylococcus aureus. Cellular viability of samples assessed by MTT and brine shrimp lethality tests. The results revealed that the higher sonication times and precursor concentrations result in a higher and more stable coating, larger particle size, wider particle size distribution, and lower content of released silver. Coated fabrics also revealed enhanced filtration efficiency (against nanosize particles), desired pressure drop, and antibacterial activity without significant cytotoxicity toward HEK 293 cells and Artemia nauplii. As a result, the coated fabrics could find potential applications in the development of facemasks for protection against different pathogenic entities.


Subject(s)
COVID-19 , Metal Nanoparticles , Animals , Humans , Silver/pharmacology , Silver/chemistry , Metal Nanoparticles/chemistry , HEK293 Cells , Masks , Anti-Bacterial Agents/pharmacology , Anti-Bacterial Agents/chemistry , Escherichia coli , Artemia
20.
Nanotechnology ; 34(17)2023 Feb 13.
Article in English | MEDLINE | ID: covidwho-2212666

ABSTRACT

The search for new strategies to curb the spread of the SARS-CoV-2 coronavirus, which causes COVID-19, has become a global priority. Various nanomaterials have been proposed as ideal candidates to inactivate the virus; however, because of the high level of biosecurity required for their use, alternative models should be determined. This study aimed to compare the effects of two types of nanomaterials gold (AuNPs) and silver nanoparticles (AgNPs), recognized for their antiviral activity and affinity with the coronavirus spike protein using PhiX174 and enveloped Phi6 bacteriophages as models. To reduce the toxicity of nanoparticles, a species known for its intermediate antiviral activity,Solanum mammosumL. (Sm), was used. NPs prepared with sodium borohydride (NaBH4) functioned as the control. Antiviral activity against PhiX174 and Phi6 was analyzed using its seed, fruit, leaves, and essential oil; the leaves were the most effective on Phi6. Using the aqueous extract of the leaves, AuNPs-Sm of 5.34 ± 2.25 nm and AgNPs-Sm of 15.92 ± 8.03 nm, measured by transmission electron microscopy, were obtained. When comparing NPs with precursors, both gold(III) acetate and silver nitrate were more toxic than their respective NPs (99.99% at 1 mg ml-1). The AuNPs-Sm were less toxic, reaching 99.30% viral inactivation at 1 mg ml-1, unlike the AgNPs-Sm, which reached 99.94% at 0.01 mg ml-1. In addition, cell toxicity was tested in human adenocarcinoma alveolar basal epithelial cells (A549) and human foreskin fibroblasts. Gallic acid was the main component identified in the leaf extract using high performance liquid chromatography with diode array detection (HPLC-DAD). The FT-IR spectra showed the presence of a large proportion of polyphenolic compounds, and the antioxidant analysis confirmed the antiradical activity. The control NPs showed less antiviral activity than the AuNPs-Sm and AgNPs-Sm, which was statistically significant; this demonstrates that both theS. mammosumextract and its corresponding NPs have a greater antiviral effect on the surrogate Phi bacteriophage, which is an appropriate model for studying SARS-CoV-2.


Subject(s)
COVID-19 , Metal Nanoparticles , Solanum , Humans , Metal Nanoparticles/chemistry , Gold/pharmacology , Gold/chemistry , SARS-CoV-2 , Spectroscopy, Fourier Transform Infrared , Silver/pharmacology , Plant Extracts/pharmacology , Plant Extracts/chemistry
SELECTION OF CITATIONS
SEARCH DETAIL